Auto Glass Products
Auto Glass Products
-
Sikaflex 220+
Add to cartSikaflex220+ is a one-component cold-applied, fast-curing, high-viscosity polyurethane adhesive designed for use in replacing direct glazed automotive glass parts. Engineered to perform to the strength of OEM requirements, Sikaflex220+ exceeds all federal requirements even in the most severe interpretations for FMVSS 212 / 208.
-
SIKA Mach 60 Tubes – Cold Applied 60 Minutes w/ Primer & Activator
Select options This product has multiple variants. The options may be chosen on the product pageSikaTack® MACH 60 is a one component cold-applied, fast-curing, high-viscosity polyurethane adhesive designed for use in replacing direct glazed automotive glass parts. Engineered to perform to the strength of OEM requirements, SikaTack® MACH 60 exceeds all federal requirements for FMVSS 212 / 208. SikaTack® MACH 60 is manufactured in accordance with ISO 9001 / 14001 quality assurance system and the responsible care program.
-
SikaTITAN P2G+
Select options This product has multiple variants. The options may be chosen on the product pageSikaTITAN-P2G+™ is a primerless to glass, one component, non-conductive, cold-applied, fast-curing, high-viscosity polyurethane adhesive designed for use in replacing direct glazed automotive glass parts. Engineered to perform to the strength of OEM requirements, SikaTITAN-P2G+TM passes all federal requirements for FMVSS 212 / 208.
-
Sika Primer 207 G+P
Select options This product has multiple variants. The options may be chosen on the product pageSika Primer-207 G+P is a black, moisture-curing liquid primer specifically formulated for the treatment of bond faces in direct glazing work prior to application of Sika polyurethane direct glazing adhesives and to improve adhesion of other Sika products.
-
Sika Products
Buy productFor a complete listing of all Sika products, go to https://usa.sika.com/en/group.html
-
Dinol Scrubs in a Bucket
Select options This product has multiple variants. The options may be chosen on the product pageDual textured wipes remove tough dirt and clean substances from hands. Citrus scent. 72 wipes per container.
-
Dinitrol D-9500
Select options This product has multiple variants. The options may be chosen on the product pageThe adhesive’s high modulus property contributes remarkably to the stiffening increase of the car-body. The low electric conductivity makes D-9500 most suitable for the replacement of windshields and/or rear windows that have an antenna incorporated. In the case of an aluminium car body, the electric insulating property of the product will prevent the danger of contact corrosion.
-
Dinitrol 582
Select options This product has multiple variants. The options may be chosen on the product pageDINITROL 582 is a transparent, water and amine-free solvent, based on aliphatic hydrocarbons. DINITROL 582 is cleaner which is highly suitable for the removal of heavily soiled surfaces on glass, paints, metals and plastics.
-
Dinitrol Activator Plus
Select options This product has multiple variants. The options may be chosen on the product pageDINITROL Activator Plus is a activating pretreatment for the glass bonding area on windshields and backlites. Also can be used as a PAAS activator.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Glass to Glass GLR001
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50’ – metal to glass. Similar to AS987/10248.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Glass to Glass GLR002
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50′ – metal to glass. Similar to AS1522.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Glass to Glass GLR003
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50′ – glass to glass. Similar to 10251/AS1536.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Metal to Glass GLR004
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50′ – metal to glass. Similar to AS893.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Metal to Glass GLR005
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50′ – metal to glass. Similar to 10254.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Metal to Glass GLR006
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50′ – metal to glass. Similar to 10232.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Metal to Glass GLR007
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50′ – metal to glass. Similar to AS1660.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Metal to Glass GLR008
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50’Â – metal to glass. AS1179.
-
One Piece Self Sealing Rubber Locking Weatherstrip Gasket 50′ – Metal to Glass GLR009
Add to cartOne piece self sealing rubber locking weatherstrip gasket 50’Â – metal to glass. Similar to AS1216.
-
Rubber Locking Insert for Two Piece Locking Weatherstrip Gasket – Metal to Glass GLR010
Add to cartRubber locking insert for two piece locking weatherstrip gasket – metal to glass. Similar to AS937.
-
Premium Rubber Universal Mouldings – Made in the USA
Select options This product has multiple variants. The options may be chosen on the product pageProudly made in the U.S.A., these universal mouldings were the first universal mouldings introduced to the market in 1988. EPDM rubber mouldings are resistant to UV rays, oxidants, and severe weather conditions, allowing them to always remain flexible even on the coldest winter day. They will not shrink or discolor, will never crimp around corners, always lay flush against the vehicle, and never need a heat gun to install because they stay flexible. A thin layer of butyl inside the channel firmly adheres the moulding to the edge of the glass holding the moulding in place.
-
Vinyl Universal Windshield Mouldings
Select options This product has multiple variants. The options may be chosen on the product pageVinyl Universal Mouldings are a cost-effective alternative to other mouldings. Available in 75′ and 100′ rolls.
-
Economy Rubber Universal Mouldings
Select options This product has multiple variants. The options may be chosen on the product pageAÂ high-quality line of ET-Economy Mouldings. An inexpensive high quality moulding when compared to others. Our EPDM rubber mouldings are resistant to ozone, oxidants, and severe weather conditions, allowing them to always remain flexible even on the coldest winter day. They will not shrink or discolor, will never crimp around corners, always lay flush against the vehicle, and never need a heat gun to install because they will stay flexible. A thin layer of butyl inside the channel firmly adheres the moulding to the edge of the glass holding the moulding in place.
-
Vinyl Tapes (Orange) for Windshield Mouldings
Add to cartTapes designed for the auto glass professional. Available without the “Remove Tape in 24 Hours” imprints. Choose rolls with 3″ or 6″ perforations for easy tear or Unperforated rolls for longer strips. Orange Translucent tapes leave no residue and are water repellent.
-
3Mâ„¢ Windo-Weldâ„¢ Round Ribbon Sealer 3/8 in. Roll
Select options This product has multiple variants. The options may be chosen on the product page3Mâ„¢ Windo-Weldâ„¢ Round Ribbon Sealer is designed as one roll of sealer with setting blocks. This ribbon sealer is constructed with a unique feature of controlled compressability which allows for easy installation. This product will not squeeze out or allow light to contact pinchweld. This roll of sealer comes with a sufficient amount of material to replace one windshield or backlite.
-
ADCO/Royal Adhesive Butyl Tape
Select options This product has multiple variants. The options may be chosen on the product pageADCO/Royal Adhesive round butyl tape.
-
Foam Core Butyl
Select options This product has multiple variants. The options may be chosen on the product pageFoam core butyl provides a unique compression recovery capability that solid butyl does not have. A perfect leak proof seal every time.
-
Spray-X Glass Cleaner
Select options This product has multiple variants. The options may be chosen on the product pageCleans Glass, Windows, Mirrors, Windshields, Enamel
Private label available
-
Sprayway Glass Cleaner
Select options This product has multiple variants. The options may be chosen on the product pageExcellent for windows, mirrors, windshields and other glass surfaces. Dissolves dirt, grease, grit, and grime. Heavy-duty foam clings to vertical surfaces. Guaranteed to leave no film. Contains perfume-grade alcohol for best performance. Ammonia-free. Clean fresh fragrance. Streakless Shine.
Private label available. -
6″ Concave Vacuum Cup with Vertical Handle
Select options This product has multiple variants. The options may be chosen on the product page- Durable metal handle, designed for convenient hand placement.
- Large-volume vacuum pump for quick attachment on curved or flat surfaces.
-
POLY ANGLE-GRIP HANDLE W/6IN CONCAVE PAD
Select options This product has multiple variants. The options may be chosen on the product pageGreat for handling windshields!
-
UltraWiz Cable Knives
Select options This product has multiple variants. The options may be chosen on the product pageThe UltraWiz® Pull Cable Knives are made from high-quality aluminum. Our handles are ergonomically shaped to provide comfort and gripping power. Our unique setscrew design allows for unlimited adjustments and easy blade changes in all of our pull cable knives.
-
UltraWiz Replacement Parts
Select options This product has multiple variants. The options may be chosen on the product pageUltraWiz replacement parts for 3000 & 4000 series knives.
-
UltraWiz Lever Knives
Select options This product has multiple variants. The options may be chosen on the product pageThe UltraWiz® Patented Lever Knives are made from high quality aluminum. Our handles are ergonomically shaped to provide comfort and gripping power. The unique lever action design allows for unlimited adjustments and easy blade changes. Choose these knives for quick, easy and fully adjustable blade changes. The inline pull cable has a heavy-duty eyelet for added strength along with a foam-covered grip for comfort. There are two lever knife kit sizes to choose from, both designed using OSHA’s Ergonomic Guidelines for Selecting Hand Tools.
-
UltraWiz Long Knives & Quick Release Long Knives
Select options This product has multiple variants. The options may be chosen on the product pageAn Industry First!!! The UltraWiz® Quick Release Utility Long Knives, at only 3/8†thick, allow you to change blades without tools; no more worn out screws, bent caps or broken locating pins! Just a smooth maneuver of rolling your thumb back over the safety catch while pushing down on the release lever allows for a quick release of the blade. Techs say they are more inclined to flip the blade to the sharp side because it can be done so easily. Easily take the blade out to store in your toolbox for safety.
-
UltraWiz Original
Select options This product has multiple variants. The options may be chosen on the product pageUltraWiz® Original Blades, “the blades that permanently changed the industry”, are manufactured by A.N. Designs Inc., one of the first companies to use compound angles in their blade design. The purpose of this design is to give the blade sharper angles, making it easier for technicians to find “the sweet spot” during cutting. Made from high-quality steel, the cold knife blades are put through a special coining process that thins the metal. They are then heat-treated to meet the UltraWiz® high standards. The engineers at UltraWiz® continually improve the processes to maintain blade thickness, strength and durability our customers have come to rely on. Selected by the majority of technicians in the industry today.
-
UltraWiz Paint Protection
Select options This product has multiple variants. The options may be chosen on the product pageThe UltraThin Paint Protection Blades (“Coated Blades” for short) are the strongest, thinnest, coated coldknife blades available! Our coated blades are 40% thinner than our original series and as a result of the manufacturing process, stronger. The coating protects automotive paint from scratches and damage while cutting out windshields or back glasses with exposed pinchwelds. The coating is applied heavily to the backside of the 51C0 Series Paint Protection Bladeswhere it is needed, but very thin on the inside surface which goes against the glass. This feature is critical because of the limited clearance between the glass and pinchweld due to new vehicle designs. With enough clearance for the blade between the glass and body, the concerns about scratching and pinchweld paint damage are reduced.
-
UltraWiz UltraThin
Select options This product has multiple variants. The options may be chosen on the product pageTo meet the demand for thinner blades, UltraWiz® created the UltraThin Blade. They are 40% thinner than our Original Blade surpassing its strength and durability. A two-step coining process thins the cut length of the blade, which is then heat-treated creating a stronger blade. UltraThin Blades out perform any other cold knife blade on the market, lasting longer and cutting with unequaled ease.
-
UltraWiz Stainless Steel
Select options This product has multiple variants. The options may be chosen on the product pageIn 2000, UltraWiz® engineers answered the request to produce a high-quality stainless cold knife blade with the benefits of edge sharpness and strength. Our engineers select stainless steel that resists twisting and bending, meeting our requirements for consistency and durability. Our unmatched hardening specifications have produced the longest lasting cutting edge available today. It is also the first coined stainless steel blade produced for the autoglass industry.
-
UltraWiz Reverse Bend
Select options This product has multiple variants. The options may be chosen on the product pageThe innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside moulding. The shank’s cutting edge has been modified to prevent scratches to the pinch weld or from cutting into the perimeters of parts with applied mouldings on the edge of the glass.
-
UltraWiz Reverse Bend Paint Protection
Select options This product has multiple variants. The options may be chosen on the product pageAuto glass technicians are increasingly encountering encapsulated mouldings on exposed pinchwelds. While they’ve been very pleased with our Reverse Bend Blades and their ability to cut under the encapsulations, many technicians have said that they would like the added protection that our 51C0 Series Paint Protection Blades offer. UltraWiz Tools is therefore proud to announce the addition of our new Paint Protection Reverse Bend Blades (52C0 Series), or “Coated Reverse Bend Blades” for short.
-
UltraWiz Radius Serrated
Select options This product has multiple variants. The options may be chosen on the product pageFor years, auto glass technicians have been grinding their blades to create a smooth radius on the back. While it makes for easier cuts by reducing resistance, it can also weaken the blade two ways if done incorrectly: First, by removing too much material making it structurally weaker. Second, by adding too much heat when thinning the blade, which can temper the steel, making it softer. This means technicians may spend extra time preparing their blades and having to contend with more breakages. What we’ve done is create the conical shape with our specially designed machines before the heat treatment process, providing both excellent performance and strength which saves technicians valuable time and ultimately money.
-
UltraWiz Specialty Blades
Select options This product has multiple variants. The options may be chosen on the product page1012-M UltraWiz® Offset Clearance Blade
- 5 per Tube
- This 1″ blade is designed to give the technician added clearance to the coldknife when cutting around the lower windshield corners. This clearance allows the coldknife to pass by a hood or fender that may overhang the glass, without bending or taping the blade, to prevent scratching the paint.
-
Fein MM 700 1.7Q (Formerly SuperCut FSC 1.7)
Add to cartThe high-performance oscillating power tool for the automotive or flat glass industry.
-
Fein Tools
Buy product -
Cutter Blade for Deep Joints
Add to cartElongated pointed blade for very deep joints.
-
Straight Cutting Blade – 2 3/8″
Add to cartZ-bend.
-
U-Shaped Cutting Blade
Select options This product has multiple variants. The options may be chosen on the product pageIdeal for glass removal from behind the hood. Short side.
-
L-shaped Gator Cutting Blade
Select options This product has multiple variants. The options may be chosen on the product pageSerrated
-
Hook Shaped Cutting Blade
Add to cartSerrated
-
Straight Cutting Blade – 1 1/4″
Add to cartZ-bend.
-
Equalizer Ambush
Select options This product has multiple variants. The options may be chosen on the product pageThe Equalizer® Ambush™ is designed to cut through the toughest urethane. A heavy-duty 20-Volt motor provides the power toquickly remove the most difficult glass.
-
Equalizer Big Dawg
Select options This product has multiple variants. The options may be chosen on the product pageThe Equalizer® Big Dawg™ is a cordless tool that will give technicians the increased power and run-time that was previously only available with a corded tool.
-
Equalizer Black-Ops
Select options This product has multiple variants. The options may be chosen on the product pageOur sleek new Black-Ops™ 120-Volt tool is a powerful addition to the Equalizer® line of Auto Glass Removal tools.
-
Equalizer 360°
Select options This product has multiple variants. The options may be chosen on the product pageThe Equalizer® 360 is the most versatile tool ever manufactured by qualizer. The rotating head can be locked in 8 different positions so ou can get into any difficult place.
-
Equalizer Express Blades
Select options This product has multiple variants. The options may be chosen on the product pageThe Equalizer® Express® Blades were developed from daily use on hundreds of different vehicles. The BFE1400 is the most used size and is perfect for slicing through wide bands of urethane. It works well in all places where you plunge cut or angle cut. The BFE1401 blade is perfect for removing glass that is not broken…
-
Equalizer Cotton Tipped Applicators
Select options This product has multiple variants. The options may be chosen on the product page6″ long so you can reach into any bottle.ontamination is the new buzzword in this industry and now that we have really started thinking about contamination it is amazing how many ways we contaminate urethane or primers.
-
Equalizer Daubrs 1/2″ Diameter
Add to cartMany vehicles have very small pinchwelds and conventional daubers are too large. A large dauber may cause urethane to spread onto the headliner or worse, drip onto the seat.
-
Equalizer Clip Removal Tool
Add to cartThere are many small clips you must remove when working with automobile glass. Many cowlings and drip gaskets around the cowlings are held on by these small clips. It is difficult to find a tool that will go under the head of these clips.
-
Equalizer Clip Removal Tool
Add to cartMany of today’s vehicles have clips that are located deep under the panel. To remove these clips you need a flat tool that will reach under the panel without prying it up. Our BT590 will reach a full 4″ under the panel to remove the deepest clips.
-
Equalizer Clip-Zip Clip Removal Tool
Add to cartThis tool makes the frustrating job of clip removal simple! Remove door panel clips and interior moulding clips with ease. Simply slide the jaws of the tool under the head of the clip and squeeze down on the handle. The outside portion lies against the body while the inside portion grabs the clip firmly so it can be lifted up without damaging the cardboard or plastic panel. Made in the USA.
-
Equalizer ClipFork Clip Remover
Add to cartHonda and Acura vehicles have some of the most annoying clips to remove. The step clip used on most of their vehicles has 4 individual locking tabs on each side and they are staggered so a locking tab will catch as you push the moulding into place. Push the molding down a little further and the next tab will catch.
-
Equalizer Compact C-Clip Remover
Add to cartC-clip removers are an item that every technician has in his toolbox, but those C-clip removers will not always fit into the tight spots and compound curves on today’s vehicles.
-
Equalizer Daubers
Select options This product has multiple variants. The options may be chosen on the product pageIn recent years, auto glass technicians have become more aware of contamination problems. One area of contamination is the pinchweld itself.
-
Equalizer Express Sheath
Select options This product has multiple variants. The options may be chosen on the product pageThe sheath is the unique idea that allows the Equalizer® autoglass cut-out knives to use a flexible blade and still have the strength to cut the toughest urethane. Equalizer® Express® Blades come in longer and shorter sizes, but there is only one size sheath and it fits all Equalizer® tools that utilize the Express® Blades. Made in the USA.
-
Equalizer Ford F-150 2004 (and up) Pickup Clip Remover
Add to cartAlso works on Nissan Maxima and many others. The trend in recent years is to create a clip that can be pushed down to different levels and lock in place. This corrects any uneven fit between the moulding and the glass.
-
Equalizer HeatWave 120-Volt Heat Gun
Select options This product has multiple variants. The options may be chosen on the product pagePerfect for reshaping mouldings, drying pinchwelds, or warming glass and pinchwelds. This compact, lightweight, easy to use heat gun is perfect for dozens of shop uses.
-
Equalizer Heavy-Duty Heat Gun
Select options This product has multiple variants. The options may be chosen on the product pageProfessional, heavy-duty, industrial and professional quality heat gun will heat up to 1000° Fahrenheit and has a huge air flow of 23 cubic feet per minute. The perfect tool for those rainy/snowy days when you really need to dry out the area around a windshield or back glass, or heat those mouldings.
-
Equalizer Honda/Acura Clip Removal Tool
Add to cartHonda/Acura clips can be very difficult to remove. The problem is you cannot push in on one part of the clip and remove it, you must push in on both prongs of the clip at the same time. Honda/Acura makes so many different style clips that a clip tool which will work on one vehicle will not necessarily work on another vehicle.
-
Equalizer Long Pinchweld Preparation Tool
Select options This product has multiple variants. The options may be chosen on the product pageSeveral years ago people started asking Equalizer for a shorter version of this tool.
-
Equalizer Metal Cleaning PrepSticks
Select options This product has multiple variants. The options may be chosen on the product pagePhosphoric acid is commonly used in body shops as a pre-primer treatment for rust and corrosion. Once the rust or corrosion is removed down to the shiny metal, the acid is applied to neutralize left over small particles, and to etch the metal for better primer adhesion.
-
Equalizer Mini-Scrapers
Add to cartA safer approach to carrying razor blades in your tool box or your pockets. It features an easy and safe blade change method.
-
Equalizer Moulding Hold Down Tool
Add to cartThe corners on today’s mouldings will often raise up and leave an unsightly gap under them. Taping these mouldings down can be disastrous because the tape will sometimes attack the paint and, in the worst case, remove it. Our moulding hold down tool is attached with a vacuum.
-
Equalizer Moulding Release Tool
Select options This product has multiple variants. The options may be chosen on the product pageSlide the tool left or right under the moulding until it hooks a retaining clip. Rock the tool with a twist of the wrist to pull the clip out slightly. This releases the moulding from the clip. Heat treated, high carbon steel.
-
Equalizer MouldingMaker
Add to cartMAKE YOUR OWN MOULDINGS…Many vehicles still use mouldings that have “square” corners. Now you can make your own mouldings. Place your universal moulding on the lower jaw of the moulding cutters and squeeze the handle. A sharp utility knife blade cuts the moulding straight, smooth and at the proper angle.
-
Equalizer MouldingMaker Adhesive
Select options This product has multiple variants. The options may be chosen on the product pageIf you are making mouldings that are mitered together at the corners, or mouldings that go all the way around a glass and join together at the bottom, then you need an adhesive that will permanently hold the moulding together. Equalizer® MouldingMaker™ adhesive is a permanent. colorless adhesive that is specially formulated to join mouldings.
-
Equalizer Narrow and Wide Pinchweld Preparation Tool
Select options This product has multiple variants. The options may be chosen on the product pageMany of today’s vehicles have a very narrow pinchweld. Sometimes the mouldings wrap around the pinchweld and when removing the moulding you must have a pinchweld preparation tool narrow enough to go down into the U-channel.
-
Equalizer Ninja Blades
Select options This product has multiple variants. The options may be chosen on the product pageThese blades are made especially for the Ninjaâ„¢ tool and designed to withstand the power produced by the back and forth motion of the air tool. The Reverse Sharpened blades are perfect for cutting out those difficult to remove back glasses or any time you want to cut close to the pinchweld. All are made of hardened spring steel.
-
Equalizer Prepmaster Kit
Add to cartThis is one of the most successful tools ever introduced by EqualizerProper pinchweld preparation is essential for a successful replacement.
-
Equalizer Prepmaster Tool
Add to cartThis is a short version of our SuperScraperâ„¢ tool. It features the same quick-change collet so you can change blades in seconds.
-
Equalizer Razor Blades
Add to cartThe most commonly used item in an auto glass shop is the razor blade. We use them to remove everything from stickers to excess urethane.
-
Equalizer Recessed Cowling Clip Remover
Add to cartSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX® screw, but are the type that can be removed with a tool like the TPE657. The only problem is the TPE657 will not reach down into the recessed area and go under the head of the clip.
-
Equalizer Replaceable Blade Pinchweld Preparation Tool
Select options This product has multiple variants. The options may be chosen on the product pageThese Pinchweld Preparation Tools are made of spring steel and are hard enough to hold an edge, but soft enough so they will not dig into the pinchweld. Without Neoprene Cover.
-
Equalizer Replacement Pinchweld Preparation Blade
Select options This product has multiple variants. The options may be chosen on the product pageReplacement blades for all of the pinchweld preparation tools shown above. These blades can also be used in the Equalizer® Switchblade™.
-
Equalizer Serrated Blades
Select options This product has multiple variants. The options may be chosen on the product pageThe serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster cutting action.
-
Equalizer Sheaths
Select options This product has multiple variants. The options may be chosen on the product pageThe sheath is the unique idea that makes the Equalizer® line of tools work. The sheath is a protective sleeve that surrounds the blade so the blade will not damage the dash or garnish mouldings. Sheaths are available in 4″, 8″ and 12″ sizes. These three sheaths will fit any of the Equalizer® line of tools except the tools that utilize HydroBladeâ„¢ technology. Made in the USA.
-
Equalizer Springer Clip Removal Tool
Add to cartThe distinct precision curvature of the Springer Clip Removal Tool provides a variable load distribution, safely moving the load point along the tool as more leverage is applied. The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter whether you are an auto glass shop or a body shop you will be amazed at all its uses.
-
Equalizer Standard Blades
Select options This product has multiple variants. The options may be chosen on the product pageThese blades are made of spring steel and specifically designed for our tools. The serrated style is sharpened with a unique double-serration method.
-
Equalizer Standard HydroBlade
Select options This product has multiple variants. The options may be chosen on the product pageEqualizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
-
Equalizer Standard Moulding Maker
Add to cartThis tool works great for cutting mouldings to size but also works perfect for cutting our StopGun™ Stops. When you use MegaRaptor™ to cut stops be sure to put the stop close to the back (see picture). This will give you enough leverage to make a clean cut.
-
Equalizer Standard Pinchweld Preparation Tool
Select options This product has multiple variants. The options may be chosen on the product pageUsed to remove urethane and butyl from the pinchweld, our pinchweld preparation tools have a hardened steel blade that can be sharpened dozens of times.
-
Equalizer Super Scraper
Add to cartThis is one of the most successful tools ever introduced by Equalizer. Technicians appreciated the thin, surgically sharp blades and it quickly became one of the most commonly used pinchweld preparation tools in the world.
-
Equalizer Super Scraper and Prepmaster Replacement Blades
Select options This product has multiple variants. The options may be chosen on the product pageSuperScraperâ„¢/ Prepmasterâ„¢ blades come in two widths: Â 5/8″ and 3/4″ wide. They are made of surgically sharp stainless steel.
-
Equalizer Super Scraper Kit
Add to cartThis tool will help you leave 2 mm (1/16″) of urethane on the pinchweld just like the manufacturers recommend.
-
Equalizer Super Scraper Replacement Blades
Select options This product has multiple variants. The options may be chosen on the product pageSuperScraperâ„¢ blades come in three widths: 1/2″, 5/8″, and 3/4″ wide. They are made of surgically sharp stainless steel.
-
Equalizer TimeSaver Blades
Select options This product has multiple variants. The options may be chosen on the product pageThese blades will cut urethane cleanly from inside the vehicle and are thinner than most blades on the market. All Equalizer® TimeSaver™ Blades are made of hardened, stainless steel and can be easily resharpened dozens of times.
-
Equalizer U-Groove Cut Out Knife – With Pull Handle
Select options This product has multiple variants. The options may be chosen on the product pageCuts a groove for Christmas tree mouldings. Many technicians use the short cut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree moulding is removed it is impossible to press it back into place.
-
Equalizer U-Groove Cut Out Knife – Without Pull Handle
Add to cartCuts a groove for Christmas tree mouldings. Many technicians use the short cut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree moulding is removed it is impossible to press it back into place.
-
Equalizer Underside Moulding Installer
Add to cartTo use the Underside Moulding Installer, push the moulding through the handle as shown (Fig. A) and then roll it along the edge of the glass (Fig. B), pushing downward (to set the adhesive) and inward against the edge of the glass (to keep the moulding a consistent distance from the outside edge). It is made of a heavy-duty plastic material and will give you years of carefree service.
-
Equalizer Wide Pinchweld Preparation Tool
Add to cartThis durable tool will give you years of service. A razor blade is too wide to use across the top or up most A-pillars, but it is ideal to use across the bottom.
-
Equalizer Window and Door Clip Remover
Add to cartWorks on GM, Ford and most common C-clips. Flared sides prevent the metal from damaging the door panel. Unique back-end firmly holds the clip for easy installation of the C-clip back into the handle. Made in the USA.
