Equalizer Express Blades

The Equalizer^® Express^® Blades were developed from daily use on hundreds of different vehicles. The BFE1400 is the most used size and is perfect for slicing through wide bands of urethane. It works well in all places where you plunge cut or angle cut. The BFE1401 blade is perfect for removing glass that is not broken. Its narrow width is more flexible, which puts less stress on the glass. The LBE1402 work well where the urethane is far below the glass, but there is a limited amount of vertical space inside the vehicle. The LBE1403 blade is perfect for removing glass that is not broken. Its narrow width is more flexible, which puts less stress on the glass. The RLE1404 work well where the urethane is very deep below the dash. The Equalizer^™ Express^®  HydroBlades^™ are the same as our standard Express^®  Blades but they have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides making the blade cut easier they also lengthen the tool life and reduce vibration because of the reduced friction on the blade. These blades can also be used with our Express^® Blade Handle. Made in the USA.